Acrylic Products Processing 4 Notes

- Jun 05, 2018-

After the processing and completion of the acrylic products, there are four points that need our attention:


First, the thermal deformation of the ordinary acrylic board is about 100 degrees, so when using acrylic products, we should pay attention to the temperature value, such as the temperature should not be higher than 90 degrees in the continuous use.


Second, the surface hardness of acrylic products is equivalent to that of aluminum, so when using or acrylic processing, we should be careful to avoid scratching the surface. If scratched, the original gloss surface can be restored by polishing.


Third, the blur or uncleanness of the acrylic products caused by a slight scratch or electrostatic adsorption dust can be cleaned with a soapy water dipped in 1% of the soft cloth.


Fourth, this is in the process of acrylic product assembly need to pay attention to the details, because the acrylic plate has a certain expansion coefficient, so in installation, it must take into account the thermal expansion and shrinkage factor of acrylic sheet, when the assembly must have a telescopic space gap.


Below is our acrylic cosmetic organizer drawers, it is by handmade completely, it is multi-function and with large capacity, if you are interested in it, please feel free contact us.

Acrylic Cosmetic Organizer Drawers (3).jpg


Previous:To Be A Firm Young Marx Next:What Is Acrylic Products